Handy Nozzle; Hard Brush - Hitachi PV-XEH900 Instruction Manual

Handy nozzle

Attach to the body before use.
Attachments can be applied while the handy nozzle is attached to the body.
How to attach
Match the position of the projection on the side
of the handy nozzle with the groove on the body.
Press in the direction of the arrow.
2
Handy nozzle
Risk of electric shock, fire, malfunction or damage.
CAUTION
Do not clean using the tip of the body without the handy brush.
 It might be damaged if excessive force is applied.
Note
If the handy nozzle is pressed down on floors with too much force, it might become damaged or crack.
 Do not strongly press the handy nozzle against the floor since it might leave a mark on the floor.
If the handy nozzle leaves a mark on the floor, refrain from using it at that location, and remove the
mark using soft cloths, etc.
 The handy nozzle can be washed with water. After washing, allow it to dry naturally before use.
Using it while wet might lead the body to malfunction.

Hard brush

This hard brush can be used to remove stains around your front entrance hall and from the floor mats in your car.
The angle can be changed depending on the location you are cleaning.
Risk of injury
When changing the angle, do not hold the rotating section.
Your hand might get pinched.
WARNING
Risk of damage
CAUTION
Do not press against areas that are particularly easy to be damaged, such as pianos.
1
Groove
Protrusion
You can change the angle.
How to detach
Press the recess and projection of the handy
nozzle and pull in the direction of the arrow.
Recess and
projection
Rotate section
E-19