Hitachi PV-XEH900 Instruction Manual page 33

Rotary brush maintenance.
1
Remove the brush holder.
Flip over the mini power head and open the lever.
Lever
2
Detach the rotary brush and remove dust.
Remove dust.
Rotary brush
 Do not use cleansers, bleach, etc. Doing so might cause discoloration, deformation, etc.
Note
 If the rotary brush has been washed with water, attach it after thoroughly drying it naturally in the shade.
It takes approximately 24 hours to dry. (The drying time may differ depending on the environment or season.
3
Adjust the rotary brush with the groove and attach it to its original position.
Adjust the rotary brush with the groove.
4
Attach the brush holder.
Insert the hook.
Hook
Note When attaching the brush holder, fasten the hook first. Failure to do so might cause damage.
Remove the dust
tangled in the groove
using tweezers, etc.
Cut and remove dust
tangled in the rotary
brush using scissors,
etc.
Attach it to its original position.
Groove
Attach the brush holder.
Remove the brush holder.
Brush holder
Tweezers
The rotary brush can
be washed with water.
Groove
Scissors
Close the lever.
E-33