Hitachi PV-XEH900 Instruction Manual page 24

Disposing the dust
Inner cylinder filter
1
Open the dust case lid → (P.E-22) and remove the inner cylinder filter.
Turn the ▽ Remove mark on the
cap to face the △ mark on the
dust case.
2
Remove dust from the inner
cylinder filter.
You can easily remove dust caught
in the sliding it in the direction of the
arrow using the maintenance brush.
3
Attach the inner cylinder filter and close the dust case lid.→ (P.E-22)
Turn the ▽ Remove mark on the cap to
face the △ mark on the dust case.
Remove
Note Securely attach the inner cylinder filter. If the vacuum cleaner is started without the filter being
securely attached, a strange noise might come from around the inner cylinder filter.
4
Attach the maintenance brush to the back side of the dust case.
Attach the maintenance brush
to the hook of the dust case.
Note If the vacuum cleaner is started without the maintenance brush attached to the back side of the dust case equipped on the body, the
brush might become detached. Firmly attach the maintenance brush by pushing it into the back side of the dust case until you hear a click.
E-24
Cap
1
Remove mark
Cap
1
mark
(Continuation)
Lift the inner cylinder filter straight up.
Maintenance brush
Turn the ▽ Attach mark on the cap to face the
mark on the dust case until you hear a "click" sound.
Firmly attach the knob of the maintenance
brush until you hear a "click" sound.
Dust case
Hook
Attach
Maintenance
brush
Note
2
Dust might spill
when the dust case
is removed. Remove
the dust case over a
newspaper, etc.
Cap
2
mark Attach
Knob
Click
Push
△