Installing An Rru Power Cable - Huawei RRU3642 Installation Manual

RRU3642
Installation Guide
Figure 7-19 Opening clips
----End

7.10 Installing an RRU power cable

This section describes the procedure for installing an RRU power cable.
Prerequisite
l
l
Context
The cross-sectional area of the RRU power cable is 6 mm
Procedure
l
Issue 01 (2011-12-27)
An easy power receptacle (pressfit type) connector is added to the RRU power cable on
the RRU side. For details, see
Connector to the RRU Power Cable on the RRU
A connector or OT terminals are added to the RRU power cable on the power device side.
For details, see the DBS3900 Installation Guide.
Install an RRU power cable that feeds power to an RRU from a DCDU-11B when the
DCDU-11B is configured.
1. Link the easy power receptacle (pressfit type) connector at one end of the RRU power
cable to the power supply socket on the RRU, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10.1 Adding an Easy Power Receptacle (Pressfit Type)
Side.
2
7 Installing RRU Cables
2
(0.009 in. ).
Figure 7-20.
77