Table of Contents
Advertisement
RRU3642
Installation Guide
Figure 6-29 Top view of the RRU
(1) Angle steel
Procedure
Step 1 Determine a position for installing the main mounting bracket.
l
l
Step 2 Fit one end of the auxiliary mounting bracket to one dual-nut bolt assembly of the main mounting
bracket.
Step 3 Install the bracket assembly on angle steel, and then fit the other end of the auxiliary mounting
bracket to the other dual-nut bolt assembly, as shown in
Issue 01 (2011-12-27)
If the RRU must be installed on a tower, see
RRU
to determine a position.
If the RRU must be installed on the ground, see
Figure 6-30 Distance between the main mounting bracket and the ground
NOTE
It is recommended that the main mounting bracket be 1,200 mm (47.24 in.) to 1,600 mm (62.99 in.)
above the ground.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3.5.1 Installation Clearance for a Single
Figure 6-30
to determine a position.
Figure
6-31.
6 Installing the RRU
45
Advertisement
Table of Contents
