Table of Contents
Advertisement
RRU3642
Installation Guide
Figure 6-31 Installing the bracket assembly
Step 4 Using a torque wrench, tighten the nuts to 40 N·m (354.03 lbf·in.) to secure both the bracket
assembly onto the angle steel, as shown in
Tighten the two dual-nut bolt assemblies alternatively. After the main and auxiliary brackets are
secured properly, measure the spacing between the brackets on both sides and ensure that the
spacing is the same on the two sides.
Figure 6-32 Securing the bracket assembly onto angle steel
Issue 01 (2011-12-27)
NOTE
Verify that the arrow on the main mounting bracket is pointing up.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
6-32.
6 Installing the RRU
46
Advertisement
Table of Contents
