Table of Contents
Advertisement
RRU3268
Installation Guide
Open the clip only for the associated cable.
Figure 9-20 Opening clips
Step 4 Remove the waterproof block.
----End
9.10 Installing an RRU Power Cable
This section describes the procedure for installing an RRU power cable.
Prerequisites
l
l
Context
There are two types of RRU power cables in terms of cross-sectional areas: 3.3 mm
2
) (12 AWG) complying with North American standards and 4 mm
European standards.
Issue ()
NOTE
NOTE
Remove only the waterproof blocks for the cables to be installed.
An easy power receptacle (pressfit type) connector is added to the RRU power cable on
the RRU side. For details, see
Type) to the RRU Power Cable on the RRU
Add a connector or OT terminals to the RRU power cable on the power device side. For
details, see the DBS3900 Installation Guide.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12.1 Adding a Tool-Less Female Connector (Pressfit
Side.
9 Installing RRU Cables
2
(0.005 in.
2
2
(0.006 in.
) complying with
108
Hide quick links:
Advertisement
Table of Contents
