Table of Contents
Advertisement
RRU3642
Installation Guide
Figure 6-14 Interchanging the cover plate in the front and the attachment plate at the rear of the
second RRU
1.
2.
3.
4.
5.
Step 4 Install the second RRU on the main mounting bracket, as shown in
Figure 6-15 Installing the second RRU on the main mounting bracket
----End
Issue 01 (2011-12-27)
Remove the attachment plate from the RRU rear using an inner hexagon screwdriver.
Remove the cover plate from the RRU front, and use a Phillips screwdriver to remove the
plastic screws from the RRU.
Install the plastic screws onto the RRU rear, and tighten the screws to 0.25 N·m (2.21 lbf·in.)
using a torque screwdriver.
Install the cover plate onto the RRU rear.
Install the attachment plate onto the RRU front, and tighten the stainless steel screws on
the attachment plate to 5 N·m (44.25 lbf·in.) using a torque screwdriver.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the RRU
Figure
6-15.
36
Advertisement
Table of Contents
