Installing The Rru On A Wall - Huawei RRU3642 Installation Manual

V400

Hide thumbs Also See for RRU3642:

Table of Contents

RRU3642

Installation Guide

Step 5 Install the RRU on the main mounting bracket until the RRU snaps shut, as shown in

6-33.

Figure 6-33 Installing the RRU on the main mounting bracket

----End

6.5 Installing the RRU on a Wall

This section describes the procedure for installing the RRU on a wall and the precautions that

must be taken during the installation.

Prerequisite

The hoist clamp on the main mounting bracket is secured properly.

Context

The wall on which RRUs are installed must meet the following requirements:

Procedure

Step 1 Place the auxiliary mounting bracket against the installation position, use a level to verify that

the auxiliary mounting bracket is placed horizontally, and then mark anchor points with a marker,

as shown in

Issue 01 (2011-12-27)

When a single RRU is installed, the wall has a capacity of bearing at least four times the

weight of the RRU.

Expansion bolts must be tightened to 30 N·m (265.52 lbf·in.) to ensure the bolts work

properly and the wall remains intact without cracks in it.

Figure

6-34.

Huawei Proprietary and Confidential

6 Installing the RRU

Figure

Table of Contents