Table of Contents
Advertisement
RRU3642
Installation Guide
Figure 3-10 RRU installed on angle steel
Installing an RRU on a Wall
The wall on which RRUs are installed must meet the following requirements:
l
l
The brackets cannot be combined when RRUs are installed on a wall, as shown in
3-11.
Figure 3-11 Correct placement of brackets
Figure 3-12
Issue 01 (2011-12-27)
When a single RRU is installed, the wall has a capacity of bearing at least four times the
weight of the RRU.
Expansion bolts must be tightened to 30 N·m (265.52 lbf·in.) to ensure the bolts work
properly and the wall remains intact without cracks in it.
CAUTION
shows an RRU installed on a wall.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information About the Installation
Figure
14
Advertisement
Table of Contents
