RRU3642
Installation Guide
Figure 10-3 Stripping the specified length of sheath
Step 4 Strip a specified length of sheath off each core wire. The length must be consistent with the
length of the notch in the easy power receptacle (pressfit type) connector, as shown in
10-4.
Figure 10-4 Stripping the sheath off each core wire
Figure 10-5 Matched length
Step 5 Add an easy power receptacle (pressfit type) connector to two core wires.
1.
Issue 01 (2011-12-27)
Tighten the screws using a Phillips screwdriver, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Appendix
Figure
Figure
10-6.
88