Getting Started; Baby Unit Power Supply; Parent Unit Power Supply - Motorola MBP48 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power outlet.
NOTE
Only use the enclosed power adapter (6V DC / 500mA).
2. Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in red.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2

Parent Unit Power Supply

IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-
ion battery 2000mAh, to give up to 5 hours monitor operation), please charge it
for 16 hours before initial use. The battery is not a user-accessible item. Please
contact the helpline if you think it needs replacing.
10 Getting Started