Using The Baby Monitor; Setting Up; Night Vision Mode; Talk Mode - Motorola MBP48 User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera by moving it up, down, left and
right until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2

Night Vision Mode

The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the front of the unit detects a low
level of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
3.3

Talk Mode

Press and hold the
the Baby Unit's loudspeaker. The
screen.
3.4

Video ON/OFF

V
Press VIDEO ON/OFF button to turn the LCD screen on or off, whilst still
leaving the audio monitor on.
Using the Baby Monitor
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the top of the LCD
icon will be displayed at the
13