Cleaning The Hose Filter; Cleaning The Wash Arms - Viking Range 5 SERIES Use & Care Manual

10.4 CLEANING THE HOSE FILTER

Damages on the machine that may be caused by
impurities coming from the water supply or your own water
installation (such as sand, dirt, rust, etc.) can be prevented
by means of the filter attached to the water inlet hose.
Check the filter and the hose regularly and clean them if
necessary.
1. Turn off the tap and remove the hose.
2. Remove the filter and clean under running tap water.
3. Place the cleaned filter back into its seat in the hose.
4. Install the hose to tap.

10.5 CLEANING THE WASH ARMS

Clean the wash arms at least once a week in order for the
machine operates efficiently.
LOWER WASH ARMS
Check if the holes on the lower wash arms (1) are clogged.
If they are clogged, remove and clean the impeller. Pull the
lower wash arms up to remove it.
UPPER WASH ARMS
Check if the holes on the upper impeller (1) are clogged. If
they are clogged, remove and clean the wash arms. Turn
nut left to remove the upper wash arms. Make sure that
the nut is tightened well when installing the upper wash
arms.
26
USA