Auxiliary Functions - Viking Range 5 SERIES Use & Care Manual

6.4 AUXILIARY FUNCTIONS

Washing programs of your dishwasher are designed to
obtain the best cleaning effect, considering the type of the
soiling, soiling degree and properties of the dishes to be
washed.
Auxiliary functions allow you to save time, water and
power.
C
Auxiliary functions may cause changes in
the program duration.
C
Auxiliary functions are not suitable for all
washing programs. Indicator of the auxiliary
function that is not compatible with the
program will not be active.
Half Load function
It is used to operate the machine without loading it
completely.
1. Load your dishes in the machine as you like. You can
use both upper and lower racks.
2. Turn the machine on with On/Off key.
3. Select the desired program and press the Half Load
key. The Half Load indicator will light on the display in
the Function Selected indicator.
4. Start the program by pressing Start / Pause / Cancel
key.
Express Function
It shortens the time of the washing cycle selected and
decreases water consumption by enabling washing under
higher pressure.
High Gloss Function
It provides superior drying performance.
Sanitize Function
Sanitize function raises the water temperature in the
final rinse to meet the requirements of NSF/ANSI
STANDARD 184 for Residential Dishwashers. Certified
residential dishwashers are not intended for licensed food
establishments.
C
At the end of a succesfull
sanitization " SAN" is
displayed on the display.
" SAN" is not displayed on
the display if the cycle is
interrupted or the water
could not be heated to the
required temperature.
C
Available programs are
indicated on Program Table
chart.
IntenseWash Function
C
Do not try to remove the IntenseWash
impeller!
Floor illumination
Illuminates to show program is still running.
(Select Models)
Your machine reflects a light to the floor during the washing
process. This light turns off after the washing process is
complete.
C
Floor illumination cannot be cancelled by the
user.
Interior Lighting
(Select Models)
Some models have interior lighting to illuminate the interior
when the door is opened.
Changing the interior lighting setting
1. After switching on your machine, press the Menu key
for 1 second.
2. Press <- and +> to proceed to "L:" on the display.
Select the position you want with the Selection key.
Interior lighting is off in "L:0" position and on in "L:1"
position.
3. Press the Menu key to exit the settings menu. Your
setting will be saved automatically.
Changing Warning Sound Volume
1. After switching on your machine, press the Menu key
for 1 second.
2. Press <- and +> to proceed to "S:" on the display.
3. Each pressing on the Selection key will change the
warning sound volume as "S:0" off, "S:1" medium and
"S:2" high.
4. Press the Menu key to exit the settings menu. Your
setting will be saved automatically.
C
Factory setting of your machine is "S:2".
19
USA
IntenseWash impeller located under the
lower impeller helps washing your
heavily soiled dishes places in the right
side of the lower basket. It will give
better results to place the most soiled
dish to the right front side.