Scheduling The Washing Time; Starting The Program - Viking Range 5 SERIES Use & Care Manual

Functions Under the Settings Menu
(depends on the model)
Under the settings menu of your product, there are some
additional functions that depend on the model.
To access these functions, press and hold the Menu key
for 3 seconds. Use <- and +> to proceed to the desired
function or setting.
Use the selection key to change the desired function or
setting and press the Menu key to exit the Settings menu.
Detergent Tablet Function Off/On
Tablet detergent function
Allows to obtain a better drying performance from the multi-
purpose detergents called as all in one detergents such as
2in1, 3in1, 4in1, 5in1 and etc., depending on the hardness
level of the tap water.
C
If you have used the Tablet features during
the last washing programme you used, Tablet
function will remain active in the next washing
programme you will select. If you do not want
to use these functions in the new program you
have selected, press the Tablet Detergent key
until the indicator of the relevant function turns
off.
C
Tablet Detergent function may cause change
in the programme duration.

6.5 SCHEDULING THE WASHING TIME

Time Delay
If an economical electricity tariff is applied in your region,
you can use the Time Delay function to wash your dishes
during appropriate hours.
You can delay the start of the selected program until 24
hours.
1. Press the Time Delay function key after selecting the
washing program and other auxiliary functions.
2. Once you press the Time Delay key, Display
Information Line will show "0:30" and Time Delay
indicator will start flashing.
3. Set the desired time by pressing the Time Delay key.
Time will increase with increments of 30 minutes up
to 6 hours and after that in 1 hour increments up to 24
hours every time you press the key.
4. Close the door of your machine after setting the
Delayed Start. Once the delay time is over, the
selected program will start automatically.
Changing the settings while Time Delay function is
active
While the Time Delay function is activated, you cannot
make changes in the washing program, auxiliary functions
or the duration of delay time.
C
Program and auxiliary functions cannot be set/
changed after the program has started.
To cancel the Time Delay function
Open the door of the product Press and hold the Program
Selection / Program Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed, close the door of
the product and wait for the draining process complete.
Draining is completed in 2 minutes and the machine gives
an audible warning when it is completed.
C
You can select and start a new program
following the cancellation of Time Delay
function.
C
Time Delay function cannot be set after the
program starts.

6.6 STARTING THE PROGRAM

Close the door of your machine to start it after selecting the
program and auxiliary functions.
C
Select Models:
Your machine performs water softening
depending on the hardness level of the supply
water. Washing time can change while the
program is running depending on the ambient
temperature where your machine is installed,
temperature of the supply water and amount
of the dishes.
C
Pay attention not to open the door of the
machine when it is running. There may be
a rush of steam when you open the door of
your machine; be careful.
C
The machine will be switched off if no button
is pressed within 5 seconds after opening the
door while the machine is running.
C
After the door has been opened, if any button
is pressed within 5 seconds and the door
is closed, the selected program resumes;
otherwise, the machine will be switched off.
Open the door after the machine has been
switched off, press On/Off button and close
the door within 5 seconds. The program will
resume washing.
C
The machine will remain silent in pause
mode for some time in order to remove the
water from the machine and on the dishes
completely and to have the water softener
cleaned, and then it will resume running in
drying mode.
20
USA