Edp Panel Voltage Selection (Jedp1) (Optional); Jeida/Vesa Selection (Vcon1) - Advantech AIMB-216 User Manual

1.8.9

EDP Panel Voltage Selection (JEDP1) (Optional)

Table 1.10: EDP Panel Voltage Selection (JEDP1) (Optional)
Function
Set the EDP panel as +5 V (3-5)
Set the EDP panel as +3.3 V (default) (1-3)
Set the EDP panel as +12 V (3-4)
1.8.10

JEIDA/VESA Selection (VCON1)

Table 1.11: JEIDA/VESA Selection (VCON1)
Function
Pull high to +3.3V (default)
(JEIDA or VESA base on panel definition)
Pull down to GND
(JEIDA or VESA base on panel definition)
SettingS
Settings
1
1
13 AIMB-216 User Manual