Barco NIO 5MP System Manual page 84

Troubleshooting
Problem description
The image on the screen is
rotated 90°
The previous image
remains slightly visible on
the screen after switching
off
On a dual-head system,
the images on the left and
right display seem to be
switched
Setting the resolution of your BarcoMed Nio
display
In order to set or change the resolution of your Nio
display you must be logged in using an account with
administrator privileges.
1. To set the resolution of your Nio display(s) right
click on the desktop and select "Properties".
2. Select the "Settings" tab.
3. Select the rectangle that represents the first Nio
display attached to the BarcoMed Nio Display
Controller you are working with.
If you are using the VGA capabilities of your
BarcoMed Nio Display Controller, the resolution for
the first display will be set to a VGA resolution of
"640 x 480" pixels with 16 colors and a default
refresh rate. If your BarcoMed Nio controller is not
running VGA, the display may not be enabled yet. To
enable the display, check the "Extend my Windows
84
Possible tests or solutions
• Select another resolution in
the Windows "Display
Properties" control panel
• This phenomenon, called
"image sticking" is normal if
the same image has been on
the screen for a long time.
The ghost image will
disappear after some time.
• Switch the video cables at
the display controller or at
the display video inputs
System manual Nio 5MP