Taping Head Adjustments - 3M -Matic 700a Instructions And Parts List

Adjustments
(Continued)
WARNING – Turn off electrical power supply and disconnect power cord from electrical
supply before beginning adjustments. If power cord is not disconnected, severe injury to
personnel could result.
Figure 5-3 – Box Drive Belt Tension Adjustment, Upper Belts (Infeed End)
Taping Head Adjustments – Refer to Section II
WARNING – Use care when working near tape cut-off blades on taping heads as blades are
extremely sharp. If care is not taken, severe injury to personnel could result.
TAPE WEB ALIGNMENT – Section II, Page 11
TAPE DRUM FRICTION BRAKE – Section II, Page 11
APPLYING MECHANISM SPRING – Section II, Page 12
ONE-WAY TENSION ROLLER – Section II, Page 12
TAPE LEG LENGTH ADJUSTMENT – Section II, Page 13
23