3M -Matic 700a Instructions And Parts List page 9

Important Safeguards
The "Caution – Pinch Point" label, shown in
Figure 1-4, is attached to the center plate at the exit
end of the machine bed. The label warns the
operator to keep hands out of this area when the
drive belts are running.
Figure 1-4 – Pinch Point Caution Label
The "Safety Instructions" label, shown in
Figure 1-5, is attached to the top/front of the upper
ski assembly. The label provides convenient
safeguard instructions for the operator and service
personnel.
Figure 1-5 – Safety Instruction Label
(Continued)
The 700a is equipped with a "Red" emergency stop
switch located on the top/front of the upper ski
assembly. The "Stop" label, shown in Figure 1-4,
is located near the switch and reminds operators
and casual personnel of the function of this switch.
Figure 1-6 – Stop Label
The "O/I" (Off/On) label, shown in Figure 1-7, is
attached to the front surface of the electrical switch
on the side of the machine frame. The label reminds
operators which button is "On" or "Off".
Figure 1-7 – Electrical On/Off Label
4