Important Safeguards - 3M -Matic 700a Instructions And Parts List

Important Safeguards

The "Center Box Here" label, shown in Figure 1-8,
is attached to the front of the upper frame to remind
the operator of the proper box placement procedure.
Figure 1-8 – Center Box Label
The "Up/Down/Lock" label, shown in Figure 1-9, is
located on the top surface, on each side, of the
upper column assembly. The label reminds the
operator of the direction to turn the height
adjustment crank to raise and lower the upper
drive belts/taping head and the locking feature.
Figure 1-9 – Up/Down/Lock Label
(Continued)
The "Notice – Taping Head Latch" label, shown in
Figure 1-10 is attached to the top surface of the
upper, left belt guard at the front edge of the taping
head. The label reminds operators and service
personnel to keep latch down except to remove
taping head.
Figure 1-10 – Upper Taping Latch Label
The "Caution – Pinch Point" label, shown in
Figure 1-11, is attached to the top of the
compression roller brackets on both sides of the
machine. The label reminds operator to keep hands
away from compression rollers when machine is
running.
Figure 1-11 – Pinch Point Caution Label
5