Battery Saver  (Sleep Mode); Display Hold - Fluke 113 Instruction Sheet

Shop for Fluke products online at:
Model 113 English Instruction Sheet

Battery Saver (Sleep Mode)
If the Meter is ON, but inactive and not connected to voltage for
more than 20 minutes, the display goes blank to preserve battery
life. To resume operation, press any button or turn the rotary
switch. To disable the Sleep Mode, refer to the Power-Up
Options section.
Sleep Mode is always disabled in MIN/MAX record mode.
Backlight
Press  to toggle the backlight on and off. The backlight
automatically turns off after 40 seconds. To disable backlight
auto-off, refer to the Power-Up Options section.

Display Hold

Warning
To avoid electric shock, when Display HOLD is
activated, be aware that the display will not change
when you apply a different voltage.
In the Display HOLD mode, the Meter freezes the digital display.
1. Press to activate Display HOLD. ( is displayed.)
2. To exit and return to normal operation, press  or turn the
rotary switch.
MyFlukeStore
www.
Page 5
1.888.610.7664
.com