Fluke 113 Instruction Sheet page 2

Shop for Fluke products online at:
Model 113 English Instruction Sheet

Do not use the Meter around explosive gas, vapor or in
damp or wet environments.

When using test leads or probes, keep your fingers
behind the finger guards.

Only use test leads that have the same voltage,
category, and amperage ratings as the meter and that
have been approved by a safety agency.

Remove test leads from Meter before opening the
battery door or Meter case.

Comply with local and national safety requirements
when working in hazardous locations.

Use proper protective equipment, as required by local or
national authorities when working in hazardous areas.

Avoid working alone.

Check the test leads for continuity before use. Do
not use if the readings are high or noisy.
MyFlukeStore
www.
Page 2
1.888.610.7664
.com