Specifications - Fluke 113 Instruction Sheet

Shop for Fluke products online at:
Model 113 English Instruction Sheet

Specifications

Accuracy is specified for 1 year after calibration, at operating temperatures of
18 C to 28 C, with relative humidity at 0 % to 95 %.
are given as follows:
Specifications are subject to change without notice.
([% of reading] + [number of least significant digits])
Function Range Resolution
6.000 V 0.001 V

60.00 V 0.01 V
[1,2]
Chek
600.0 V 0.1 V
Function Range Resolution
[3,4]
2.000V 0.001V

[3]

600.0  0.1 
[3]

6.000 k 0.001 k
60.00 k 0.01 k
1000 nF 1 nF
10.00 F 0.01 F
[3]
 100.0 F 0.1 F
9999 F 1 F
[1] All  Chek voltage ranges are specified from 60 counts to 100 % of
range. Because inputs below 60 counts are not specified, it is possible
and normal for this and other true-rms meters to display non-zero
readings when the test leads are disconnected from a circuit or are
shorted together.
Crest factor of 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
[2]
[3] After measuring voltage, a wait time of 1 minute is required to maintain
accuracy of ohms, capacitance, diode test, and continuity.
[4] Range specified above 110 counts.
MyFlukeStore
www.
Page 14
Accuracy specifications
Note
Accuracy
DC, 45 to 500 Hz 500 Hz to 1 kHz
2.0 % +3 4.0 % + 3
Accuracy
2.0 % + 3
Beeper on <20 , off >250 ; detects
opens or shorts of 500 s or longer
0.9 % + 2
0.9 % + 1
0.9 % + 1
1.9 % + 2
1.9 % + 2
1.9 % + 2
100 F - 1000 F: 1.9 % + 2
> 1000 F: 5 % + 20
.com
1.888.610.7664