Battery Saver (Sleep Mode); Min Max Avg Recording Mode - Fluke 175 User Manual

Battery Saver (Sleep Mode)

The Product enters the Sleep mode and the display goes blank if
there is no function change or button press for 20 minutes. To
disable the Sleep mode, hold down
on. The Sleep mode is always disabled in the MIN MAX AVG
mode and the AutoHOLD mode.

MIN MAX AVG Recording Mode

The MIN MAX AVG recording mode captures the minimum and
maximum input values and calculates a running average of all
readings. When a new high or low is detected, the Product beeps.
For dc functions, accuracy is the specified accuracy of the
±
measurement function 12 counts for changes longer than
350 ms in duration.
For ac functions, accuracy is the specified accuracy of the
±
measurement function 40 counts for changes longer than
900 ms in duration.
while turning the Product

Note
To use MIN MAX AVG recording:
1. Set the desired measurement function and range.
(Autoranging is disabled in the MIN MAX AVG mode.)
2. Press  to activate MIN MAX AVG mode.
 and MAX come on, and the highest reading detected
since entering MIN MAX AVG shows on the display.
3. To step through the low (MIN), average (AVG), and present
readings, press .
4. To pause MIN MAX AVG recording without erasing stored
values, press  .
 comes on.
5. To continue MIN MAX AVG recording, press
 turns off.
6. To erase stored readings and exit, press
turn the rotary switch.
True-rms Multimeters
Battery Saver (Sleep Mode)
 again.
 for 1 second or
9