Adjusting Parts According To Bottom Cloth Width - Siruba ASL-JBH200C Original Instructions Manual

褲邊寬度變化零件的調整
1. 褲邊寬度 200 ～ 300 ｍｍ
⑴將前引導滾輪⑤沿著箭頭方向⑥移動調整。
⑵鬆開調整把手①，將後引導滾輪②沿著箭頭
方向⑦移動調整。
⑶在撐開褲邊的動作中，撐褲邊滾輪開關處於
ON 的狀態，撐褲邊滾輪③回到原處，後引
導滾輪②向左移動。
①
②
⑦
P8
ADJUSTING PARTS ACCORDING
TO BOTTOM CLOTH WIDTH
1.Bottom cloth width 200～300ｍｍ
⑴ Move front guide roller ⑤ to the arrow
direction ⑥ to adjust.
⑵Loosen adjusting handle ①,and let rear
guide roller ② move to arrow direction ⑦to
adjust.
⑶During the motion of holding the bottom
cloth open, the bottom tension roller switch
③ goes back to its original position while it
is in operation, move rear roller ② to left.
⑤ ⑥ ③
①