Table of Contents
Advertisement
3.4.3 G
RAPHICAL DISPLAY
There are three graphical display choices:
LINE, The Line graph is a moving average of the process variable with the 4-20 mA range as the
maximum/minimum values and a choice of time scales.
The Time scale is the amount of time displayed across the full screen. Choices include:
Full Screen Period
Sample Rate ( 1 point every)
GAUGE, Live reading displaying 0-100% of 4-20 mA range. The Alarm Relay number(s), #1, #2 and#3
mark the respective set points on graph.
BAR, Live reading displaying 0-100% of 4-20 mA range. The Alarm Relay number(s), #1, #2 and#3 mark
the respective set points on graph.
Pressing OK after selecting a Graphical Display will exit the menu structure and return to the Main Display.
Location: CONFIG → XMTR → LCD → GRAPH
3.4.4 TAG T
RANSMITTER
Two 16 character lines are available for naming the transmitter, Upper and Lower case characters, Numbers and
Punctuation are available. The information entered will be displayed in the INFO screen and optionally in the
Main display sequence if activated in the TAG ON menu. The character set is listed below sequentially; the first
character in the set is an empty space.
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ¥ ] ^ _
' a b c d e f g h I j k l m n o p q r s t u v w x y z { | } → ←
Entry is accomplished by scrolling through the alphanumeric list with the ▲ (forward →) and ▼ (backwards ←)
arrows to the character of choice and then pressing NEXT to advance the cursor to the next digit. Pressing and
holding the ▲ or ▼ keys will initiate two speed auto scrolling. Press BACK to exit the screen.
Location: CONFIG → XMTR → LCD → LABELS → TAG
3.4.5 S
N
ENSOR
AME
Two 16 character lines are available for naming the Sensor, Upper and Lower case
characters, Numbers and Punctuation are available. The information entered will
be displayed in the INFO screen. Entry is accomplished by scrolling through the alphanumeric list with the ▲
(forward →) and ▼ (backwards ←) arrows to the character of choice and then pressing NEXT to advance the
cursor to the next digit. Pressing and holding the ▲ or ▼ keys will initiate two
speed auto scrolling. Press BACK to exit the screen.
Location: CONFIG → XMTR → LCD → LABELS → SENSOR
Page 29
15 minutes
10 seconds
N
AME
1 hour
12 hours
40 seconds
8 minutes
1 day
2 days
15 minutes
30 minutes
Model TC80
Advertisement
Table of Contents
