Wiring; Wiring, Power - ECD TC80 Instruction Manual

2.2 WIRING

Electrical wiring should only be conducted by qualified personnel. See the T80 wiring diagram in Figure 2.2.2
Figure 2.2.2 4-Wire Transmitter, 24VDC or /110/22 VAC, MODBUS, Relays/Optional Digital Preamp
Warning: RISK OF ELECTRICAL SHOCK
Disconnect Power before opening instrument.
WARNING Electrical installation must be in accordance with the National Electrical Code
(ANSI/NFPA-70), Canadian Electrical Code and/or any other applicable national or local
codes.
2.2.1 W ,
IRING POWER
ECD recommends using a thermoplastic, outdoor sunlight resistant jacketed cable, wet location rated and ½"
flexible conduit. The power should be hard wired with a switch or breaker to disconnect the analyzer from the
16