Info (Information Menu); Sim (Simulation Menu) - ECD TC80 Instruction Manual


o SERIAL MODBUS configure serial output,



o PASSWD Enter 4 character password to protect access to MENU Level, CAL Menu, CONFIG
Menu and SIM Menu (simulate). Each level can be turned ON or OFF and can have a unique
password.




 SENSOR enters the sensor configuration menu.
o Choose SENSOR 1 or 2


o COMP Dual Channel Only, Sets compensation type: Dissociation (pKa),
+
NH , Free Chlorine, HF, S
4
Sensor 1, Percentage % change per pH, Total Chlorine -5%.
o Qty of SENSORS, Choose 1 or 2
 Load Default resets all Menus to factory default configuration.
 Dampen, sets the number of measurements averaged for the displayed PV
3.2.4 INFO (I
NFORMATION
The Information Menu provides two choices,
 Transmitter Screen, details the Name, Power type, Serial #, Firmware version
and the output configuration(s).
 Sensor Screen, details the Name, Part #, Serial # and three sets of Calibration data.
 COMP, displays the pKa, the sensor affected and the dissociation Factor,
3.2.5 SIM (S
IMULATION
The Simulation menu allows the Input or Output signals to be simulated.
Page 25
o Disable, Inactivates relay and removes the
relay button from the HOME Screen display.
HOLD, Freezes outputs at current value and locks relays in
their current state.

Hold Timeout, Removes HOLD after a certain period
of time, default setting: No Timeout, selections include 15 minutes, ½ hour, 1
hour
ADDRESS, enter address: 001 to 247
BAUD, Choose baud rate, default 9600
FORMAT, set serial data format, default value: 8N1, 8 bit, no
parity bit, 1 stop bit
MENU ON/OFF _ _ _ _ Locks Main Menu
CAL ON/OFF _ _ _ _ Locks CAL and CONFIG
CONFIG ON/OFF _ _ _ _ Locks CONFIG
SIM ON/OFF _ _ _ _ Locks SIM and CONFIG
TYPE, Allows T80 transmitter to configure the S80 sensor. For
use only when switching the measurement electrode type in
an S80 sensor, i.e. for a pH electrode to a pION electrode.
Select Sensor Type: pH, ORP, DO
Conductivity, Resistivity, Cu
T COMP, Enter % temperature compensation per degree: pH,
0.33%, Total Chlorine 0%,
-2
, Interference, X ppm Sensor 2 = 1 ppm
M )
ENU
M )
ENU
+ -
, NH , NH , Br , Ca
2 3 4
++ - - - + +
, CN , F , NO , K , Ag , Na
3
++ -
, Cl ,
+ --
, S
Model TC80