15 Operator menu – moisture analysis
To carry out user-defined drying processes, the device has space for up to 20
different, operator-defined drying programs. Simply invoke and start the finished
programs from the library (See chap. 15.2).
How to set drying parameters without using the program library is describes in the
chapter below.
15.1 Moisture analysis without using the program library
Disabling the program library:
The program library function P6-01 Libr must be deactivated in the user
menu to enable free input of drying parameters see chap. 14, P6-01-Libr.
Setting drying parameters
You can enter parameters for each drying process in the menu, as follows:
42
Shutoff criterion
Heating profile (temperature, time)
Result display
MLB_C-BA-e-1431