Cisco Ata 191 Analog Telephone Adapter Administration Guide For Cisco Unified Communications Manager - Cisco ATA 191 Administration Manual

Configure the ATA 191
Parameter
Log Profile
Customer support upload URL
Load Server
IPv6 Load Server
Auto Barge
Echo Cancellation

Cisco ATA 191 Analog Telephone Adapter Administration Guide for Cisco Unified Communications Manager

Product-Specific Configuration Parameters
Description
Run the pre-defined debug command remotely:
• Default—Resets the debug level to default.
• Preset—Use log module settings on Phone Adapter
Configuration Utility for debug flags.
• Telephony—Turn on debug flag for provisioning (including
auto upgrade) and call features.
• SIP—Turn on debug flag for SIP messages.
• UI—Turn on debug flag for key event such as DTMF, PRT,
and reset button.
• Network—Turn on debug flag for network events, such as
DHCP, VLAN, link status change.
• Media—Turn on debug flags for RTP, Fax, Tone, and
SLIC-related issues.
• System—Turn on debug flag for system events, such as
reboot, or factory reset.
• Web—Turn on debug flag for web operation and event logs.
• NTP—Turn on debug flag for NTP related logs.
• CDPLLDP—Turn on debug flag for CDP and LLDP logs.
• Security—Turn on debug flag for security related logs.
Provides the URL for the Problem Report Tool (PRT).
If using IPv4, the ATA uses an alternative server to obtain
firmware loads and upgrades, rather than the defined TFTP server.
If using IPv6, the ATA uses an alternate server to obtain firmware
loads and upgrades, rather than the defined TFTP server.
Auto Barge adds a user to an active call. An offhook phone
automatically adds the user (initiator) to the shared line call
(target), and the users currently on the call receive a tone (if
configured). Barge supports conference bridges.
Enable or Disable the use of echo canceler.
33