Page 1
Operating Instructions Operating Mamual COOLING WATER CIRCULATOR WBL-MINI Before you operate the equipment please read carefully all the instructions and safety notes. If you have any questions please phone us! Follow the instructions on setting up, operation etc. This is the only...
Page 2
Safety notes 、 · Transport the equipment with care! · Careful transportation of the equipment requested ! · The unit may NEVER be overturned nor put upside down ! · Equipment and its internal parts can be damaged : - by dropping - by shock.
Page 3
It should be filled with pure water, or a water-glycol mixture (min. 70:30%)!! When using water as heat carrier at WBL-MINI please make sure that there are no operating temperatures below 5°C in the outflow. To assist in venting the pump, the pressure connection should be left open...
Page 4
When starting up for the first time, fill the bath as full as possible, up to the max. level . After filling up an external circuit further liquid may have to be added. Connect the pump connections at the back of the equipment to the external circuit.
Page 5
Display window Process Value Display Displays PV, or code of a parameter Displays SV, alarming code, or value of a parameter Setting Value Display OPERATION DESCRIPTION ● Basal display status : When power on, the upper display window of the instrument shows the process value (PV), and the lower window shows the setpoint (SV).
Page 6
(Generally, the temperature of transducer can be raised quick than that of heated material) Technical data 、 Specifications for WBL-MINI Model WBL-MINI Parameters @25℃...
Page 7
We accepts no responsibility for damage due to unsatisfactory packing. 7.4 About us We are available any time for your queries, suggestions and critic Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.10.16...
Need help?
Do you have a question about the WBL-MINI and is the answer not in the manual?
Questions and answers