Manrose LED Series Installation Instructions

We reserve the right to change specification without notice
Manrose is proudly distributed by Simx Limited
PO Box 14 347, Panmure, Auckland, NZ. Technical Support (09) 259 1662
e: sales@simx.co.nz | www.simx.co.nz | www.manrose.com.au
Installation Instructions
MANROSE 150MM
EXTRACT-A-LITE/EXTRACT-A-LED DIFFUSER
Please read all instructions before commencing installation.
LED models
DCT3208, DCT3209, DCT3211, DCT3212, DCT3640
Electrical
Supply
Replacement
driver
Lamp
Replacement
lamp
Please ensure the corrrect LED lamp and driver OR Halogen lamp and transformer are used for
replacements. The LED model MUST be replaced with an LED lamp and the Halogen model MUST
be replaced with a Halogen lamp. They are not interchangeable.
Diagram 1
INSTALLATION
PUB0164 iss:05 05/15
Halogen models
DCT1169, DCT1171, DCT1521, DCT1522
Driver Input: 220-240 VAC Electrical
Supply
Driver Output: 12VDC
FAN5342 Replacement
transformer
MR16: 12V / 3W high power LED Lamp
LHT0221 Replacement
lamp
When screw is tightened fixing
clip fingers secure the fan
Fixing clip
Fan
chassis
Ceiling board
Screw
P R O - S E R I E S
Transformer Input: 220-240 VAC
Output: 12VAC
FAN2101
MR16: 12V / 50W Halogen
FAN0431