Commissioning
Prior to initial switch-on of the filter module
check the wiring for completeness, short-
circuit and earth fault.
If the wiring is not correct, a non-intended
operation of controller and/or filter module
is possible.
First powering up
1.
Switch on mains supply :
- The filter module is ready for operation at
once.
2.
Check the readiness of the frequency con-
verter:
- Proceed in accordance with the operating
instructions of the frequency converter.
18
AHF 005/010
®
MG.80.B5.02 - VLT
is a registered Danfoss trademark
Need help?
Do you have a question about the VLT AHF 005 and is the answer not in the manual?