Switching On The Photometer And Setting The Language - wtw photoLab 7100 VIS Operating Manual

Commissioning
Connect the power
pack
14
1
3.2.3

Switching on the photometer and setting the language

During the initial commissioning the photometer automatically guides you to
the setting of the meter language after switching on (<ON/OFF>).
General setup
German
3 English
Français
Español
Italiano
Bulgarian/Български
Česko
Simplified Chinese/??
Traditional Chinese/
Greek/Ελληνικά
After the initial commissioning, you can change the language in the General
setup / Language menu at any time.
1 Connect the miniplug of the power
pack to the socket (1) of the pho-
tometer.
2 Connect the power pack to an
easily accessible power socket.
1 Select a language with <><>.
16.01.15 9:52
2 Confirm the selected language
with <START·ENTER>.
The language has been set.
The currently selected language
has a checkmark.
The display switches to the setting
of Date and Time.
®
photoLab 7100 VIS
ba77095e03 10/2017