Measuring Reagent Tests With Autoselector - wtw photoLab 7100 VIS Operating Manual

®
photoLab 7100 VIS
ba77095e03 10/2017

4.4.2 Measuring reagent tests with AutoSelector

On one side, the AutoSelector has a bar code encoding a method number.
When the AutoSelector is inserted in the round cell shaft, the bar code is
automatically read and the relevant method selected by the photometer.
<HOME>
Concentration
Concentration
Please select method for measuring
or insert a barcoded cell
or insert AutoSelector.
Setup
Method list Last method
Concentration
1.92
18: 14752
10 mm
Setup Method list Citation form
1 Open the cell shaft cover.
16.01.15 9:52
New Method
2 Insert the AutoSelector in the
round cell shaft so it touches the
bottom. When doing so, align the
line mark with the notch at the
front of the round cell shaft (see
section 4.2.4 I
The photometer selects the cor-
rect method with the aid of the bar-
code.
3 Insert the rectangular cell. The
correct measuring range is auto-
matically selected when the rect-
angular cell (1, 2, 5 cm) is
inserted.
The photometer starts measuring
automatically.
4 Further options:
16.01.15 9:52
– Select a different citation form
with [Citation form],
(e.g. NH
mg/l
– Select a different measuring
unit with [Unit],
(e.g. mg/l <–> mmol/l).
NH -N
4
0.05 - 3.00 mg/l
– Make further settings with
Unit
[Setup].
Operation
).
NSERTING A CELL
<–> NH -N).
4 4
29