General Information - Dometic 9200 Series Installation Instructions Manual

Power Awning
LIFTING HAZARD. Use proper lifting technique and control when lifting the awning. Failure to
obey this caution could result in injury.
Failure to obey the following notices could damage product or property:
• ALWAYS use sealant on clean parts and surfaces where fasteners enter RV walls. Otherwise, water leakage
could occur.
• Install back channels on a flat surface, level, and keep parallel with each other to ensure correct function and
appearance.
• This product is for use with 12 VDC only.

2 GENERAL INFORMATION

Included Parts
15 Amp Circuit Breaker
#14-10 x 1-1/2" Hex Head Screw
#6-20 x 7/16" Self-drilling Hex Head Washer Screw
Slic Pin
Hardware End Covers (# = B for White, # = U for Black):
• 3316607.002# Front Right
• 3316813.000# Back Right
• 3316608.002# Front Left
• 3316814.000# Back Left
Optional Parts*
Door Roller Kit
Back Channel Spacer Kit
Door Roller Kits (50 Pack)
*Available as accessory (not included).
Required Tools
Drill
3/16" Drill Bit; 7/32" Drill Bit (For Steel Mounting)
3/8" Hex Driver (For Drill)
5/8" Drill Bit
EN
Quantity
1
8
2
1
4
Reference Number
830304
3312853.025 (#)
830304.003
4