Intended Use; Specifications - Dometic 9200 Series Installation Instructions Manual

3 INTENDED USE

This 9200 Series Power Awning (hereinafter referred to as "Awning") is designed and intended for installation on
a Recreational Vehicle (hereinafter referred to as "RV") during or after the RV manufacture. Use these instructions
to ensure correct installation and function of the product.
The Product kit is available for order with various components, so while some graphics may show different
components, they still illustrate the correct procedure. All components that were not originally ordered can be
purchased as an add-on or upgrade.
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection.
• Damage to the product resulting from mechanical influences and excess voltage.
• Alterations to the product without express permission from the manufacturer.
• Use for purposes other than those described in the operating manual.
Dometic Corporation reserves the right to modify appearances and specifications without notice.

4 SPECIFICATIONS

4.1 Hardware dimensions (back channel)
8962XX1.4X0#(L) 8962XX2.4X0#(L) 8962XX3.4X0#(L)
A 62 3/4"
B
62 1/8"
C
60 1/8"
D 60 3/4"
E
61 1/2"
F
G
H
J
K
L
M
I
Wiring harness location may be at the top or
bottom of the back channel, depending on
the awning model.
5
66 1/4" 66 1/4"
65 5/8 65 5/8"
63 5/8" 63 5/8"
64 1/4" 64 1/4"
65" 65"
33"
39"
3/8"
1/4"
5/8"
3/4"
1 1/2"
Top Wiring
1
Harness Notch
F
G
C
B
J
A
K
Power Awning
H
M
L
E
D
Bottom
Wiring
Harness
Hole
EN