Safety Instructions; Recognize Safety Information; Understand Signal Words; General Information - Dometic WeatherPro Installation Instructions Manual

SAFETY INSTRUCTIONS

This manual has safety information and instruc-
tions to help users eliminate or reduce the risk
of accidents and injuries.

RECOGNIZE SAFETY INFORMATION

This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe op-
erating instructions.

UNDERSTAND SIGNAL WORDS

A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level
of risk for potential injury.
indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
used without the safety alert symbol
indicates, a potentially hazardous situation which, if not
avoided, may result in property damage.
Read and follow all safety information and in-
structions.

GENERAL INFORMATION

COVERED BY PATENT 5383346, 4941524, D366763,
6095221, 6230783, D414880, 6164883, 6276424,
6230786, D410192, D429894 , 6273172 & 6798158
OTHER PATENTS PENDING
855120(X).400(X) WeatherPro Hardware Installation Instructions
REQUIRED PARTS
8551201.400(X) & 8551202.400(X) Hardware
(2) - Top Mounting Bracket Cover
(2) - Bottom Bracket Cover
(4) - #14-10 x 2-3/4" Hex Head Screw
(4) - #14-10 x 2" Hex Head Screw
(2) - .25" Split Lock Washer
(4) - #10-16 x 3/4" Hex Washer Head Self Drilling Screw
(4) - 3/16" x 1" Oscar Rivets
(2) - #6-20 x .44" Hex Washer Head Self Drilling Screw
(1) - 1/4"- 20 x 3/4" Hex Head Bolt
(1) - 1/4"-20 x 1.25" SS Screw, Hex Cap
(1) - 1/4"-20 SS Lock Nut W/Insert
(2) - Spacer 25" ID X .5" OD X .125" Wide Curved
(1) - Spacer .265" ID X .5" OD X .187" Wide Flat
8551203.400(X) & 8551204.400(X) Hardware
(2) - Bottom Bracket Cover
(4) - #14-10 x 1-1/2" Hex Head Screw
(4) - #14-10 x 2" Hex Head Screw
(2) - .25" Split Lock Washer
(4) - #10-16 x 3/4" Hex Washer Head Self Drilling Screw
(4) - 3/16" x 1" Oscar Rivets
(2) - #6-20 x .44" Hex Washer Head Self Drilling Screw
(1) - 1/4"- 20 x 3/4" Hex Head Bolt
(1) - 1/4"-20 x 1.25" SS Screw, Hex Cap
(1) - 1/4"-20 SS Lock Nut W/Insert
(2) - Spacer .25" ID X .5" OD X .125" Wide Curved
(1) - Spacer 265" ID X .5" OD X .187" Wide Flat
When Installing
3310287.002 the following connectors, pins, and sockets
are required and must be supplied by the installer. Ad-
ditional wiring is also required and must be supplied by
the installer.
(4) 350766-1
(4) 350777-1
(1) 350779-1
(6) 350689-1
(1) 350550-1
(2) 640310-1
(14) 350547-1
When Installing Electronic Control Kit Number 3310287.010
the following Wire Harness Kit is supplied. Additional wir-
ing is required and must be supplied by installer.
(2) - 3309726.010 Wire Harness, Patio Motor
(2) - 3309726.028 Wire Harness, Door Motor
(2) - 3309726.036 Wire Harness, Wind Sensor
(1) - 3309726.044 Wire Harness, Patio Remote Switch
(1) - 3309726.051 Wire Harness, Door Remote Switch
(1) - 3309726.067 Wire Harness, 12 VDC Power
Important:
Read and understand ALL of the following
steps before beginning installation.
2
(Packed with each Hardware Assembly)
Electronic Control Kit
Plug (3 position)
Plug (2 position)
Plug (4 position)
Socket (18-24 gauge)
Socket (14-20 gauge)
Socket (10-12 gauge)
Pin (14-20 gauge)
Number