problem
Tool will not start
1.
2.
3.
4.
Tool operates
1.
slowly or
intermittently
2.
Saw Blade will not
1.
turn
Saw does not cut
1.
effectively
2.
3.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
SKU 66660
troubleshooting
possible Causes
No power at outlet.
Cord not connected.
Cord Damaged
Carbon Brushes worn or
damaged
Worn or damaged Carbon
Brushes
Damaged Power Cord
Spindle Lock (14) may be
engaged.
Arbor Bolt is loose or Arbor
Washers are not seated.
Blade is dull or incorrect for
application.
Blade direction is wrong.
For technical questions, please call 1-800-444-3353.
Likely Solutions
1.
Check power at outlet.
2.
Check that cord is plugged in.
3.
Check condition of cord
4.
Check condition of Carbon Brushes, replace
if necessary.
1.
Check condition of Carbon Brushes, replace
if necessary.
2.
Check condition of cord and repair if
necessary.
1.
Press it to release. If it won't release, repair
tool before use.
1.
Seat Arbor Washers and tighten Arbor Bolt
2.
Check condition of Blade and replace if
necessary.
3.
Match rotary direction markings on blade
with arrow on Lower Blade Guard (37).
Page 18