Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
12" DOUBLE-BEVEL
SLIDING COMPOUND
MITER SAW
WITH LASER GUIDE
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 69684
Advertisement
Table of Contents
Related Manuals for Chicago Electric ITEM 69684
Summary of Contents for Chicago Electric ITEM 69684
- Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69684 12" DOUBLE-BEVEL SLIDING COMPOUND...
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-800-444-3353. Item 69684... - Page 3 10. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. Item 69684 For technical questions, please call 1-800-444-3353. Page 3...
- Page 4 The blade result in a risk of injury to persons. retaining nut/bolt should be checked periodically and tightened if necessary, especially after braking. 21. When servicing use only identical replacement parts. Page 4 For technical questions, please call 1-800-444-3353. Item 69684...
-
Page 5: Safety
If you feel any medical or vibration occurs, stop use immediately. physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 69684 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Specifications
This product complies with 21 CFR 1040.10 and 1040.11 Diode Mfr.: Zhenjiang Bouncer Stone Electron Co, Ltd, 2F, Guyang Xincun Uptown 16 Din Mao Rd., Zhenjiang, China Manufacture Date: ___________, ______ Page 6 For technical questions, please call 1-800-444-3353. Item 69684... -
Page 7: Setup
Mounting Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included. Item 69684 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Functions
Lock Lock Trigger Lower Guard Dust Collection Blade Slide Lock Knob Bevel Angle Clamp Indicator Bevel Lock Knob Fence Turntable Table Miter Extension Miter Scale Kerf Board Miter Lock Knob Page 8 For technical questions, please call 1-800-444-3353. Item 69684... - Page 9 Loosen this to allow the cutting head to slide. Note: Additional functions are explained Align pin with Align pin with elsewhere in the manual. deep groove shallow groove to lock cutting head. to unlock cutting head. Item 69684 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Operation
9. Rotate the Guard Pivot Plate (132) back into place, and secure it with the Guard Pivot Bolt (193). 10. WARNING! Make sure the Lower Guard (133) operates smoothly and properly protects from the Blade before using the saw. Page 10 For technical questions, please call 1-800-444-3353. Item 69684... - Page 11 4. Make a sample cut in a piece of scrap to confirm that the bevel angle is correct. Bevel If it is not, correct the angle before cutting. Lock Knob Bevel Indicator Figure C Item 69684 For technical questions, please call 1-800-444-3353. Page 11...
- Page 12 Clamping the workpiece will also improve cutting accuracy by preventing the workpiece from moving during the cutting operation. Page 12 For technical questions, please call 1-800-444-3353. Item 69684...
- Page 13 Trigger to start the Saw and the laser guide. Note: If the laser guide line does not line up with the cut line, release trigger and reposition workpiece before making the cut. Item 69684 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Maintenance
Repeat the process until the Fence is adjusted accurately. 5. Once the Fence is accurately adjusted, tighten the bolts firmly in place. Recheck one last time, then proceed to work. Page 14 For technical questions, please call 1-800-444-3353. Item 69684... - Page 15 Bevel Angle at 45º left. 4. Ensure that the left side of the Blade clears the Kerf Board. 5. Tighten the four screws holding the Kerf Board in place. Item 69684 For technical questions, please call 1-800-444-3353. Page 15...
-
Page 16: Troubleshooting
2. Depth Stop set too shallow. 2. Adjust Depth Stop Bolt for desired depth of cut. through workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-800-444-3353. Item 69684... -
Page 17: Parts List And Diagram
M6×25 Slide Lock Knob Turntable Ø10 Flat Washer Miter Indicator M10 Nut Ø8 Fender Washer Bevel Lock Knob M8 Nut Ø45×Ø30×50 Slide Bushing Bevel Scale Slide Rail Ø2×4 Rivet Ø4 Spring Washer Item 69684 For technical questions, please call 1-800-444-3353. Page 17... - Page 18 130 Rubber Stopper 190 Transformer 131 M6×7 Flat Head Bolt 191 ST3.2×6 Cross Screw 132 Guard Pivot Plate 192 Connector 133 Lower Guard 193 M6×10 Guard Pivot Bolt 134 Turntable Plate Page 18 For technical questions, please call 1-800-444-3353. Item 69684...
- Page 19 Assembly Diagram (1 0) Item 69684 For technical questions, please call 1-800-444-3353. Page 19...
-
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the ITEM 69684 and is the answer not in the manual?
Questions and answers
Where do I get parts for item 69684 Chicago electric miter saw
Individual parts for the Chicago Electric miter saw ITEM 69684 are shown for illustration purposes only and are not available individually as replacement parts.
This answer is automatically generated
Where can I get replacement parts? I'm in Louisville Kentucky
Replacement parts for Chicago Electric ITEM 69684 are not available individually, as stated in the manual.
This answer is automatically generated
How do I get item #120 for the blade guard? Can I buy tge assembly?