Troubleshooting; Please Read The Following Carefully - Chicago Electric 98058 Set Up And Operating Instructions Manual

problem
Tool will not start 1.
2.
3.
4.
Cut quality is poor. 1.
2.
3.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.

please read tHe FOllOwing CareFully

THE MAnufACTurEr And/Or diSTribuTOr HAS PrOvidEd THE PArTS LiST And ASSEMbLy
diAgrAM in THiS MAnuAL AS A rEfErEnCE TOOL OnLy. nEiTHEr THE MAnufACTurEr Or
diSTribuTOr MAkES Any rEPrESEnTATiOn Or WArrAnTy Of Any kind TO THE buyEr THAT
HE Or SHE iS quALifiEd TO MAkE Any rEPAirS TO THE PrOduCT, Or THAT HE Or SHE iS
quALifiEd TO rEPLACE Any PArTS Of THE PrOduCT. in fACT, THE MAnufACTurEr And/Or
diSTribuTOr ExPrESSLy STATES THAT ALL rEPAirS And PArTS rEPLACEMEnTS SHOuLd bE
undErTAkEn by CErTifiEd And LiCEnSEd TECHniCiAnS, And nOT by THE buyEr. THE buyEr
ASSuMES ALL riSk And LiAbiLiTy AriSing OuT Of HiS Or HEr rEPAirS TO THE OriginAL
PrOduCT Or rEPLACEMEnT PArTS THErETO, Or AriSing OuT Of HiS Or HEr inSTALLATiOn
Of rEPLACEMEnT PArTS THErETO.
SKU 98058

troubleshooting

possible Causes
No power at outlet.
Cord not connected.
Tool overheated.
Carbon Brushes need
replacement.
Blade damaged or dull.
Blade not installed properly.
Blade being forced into
workpiece.
For technical questions, please call 1-800-444-3353.
likely solutions
1. Check power at outlet.
2. Check that cord is plugged in.
3. Allow tool to cool completely before
continuing.
4. Replace Carbon Brushes.
1. Replace Blade.
2. Secure Blade properly.
3. Cut more slowly.
Page 14