Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
10"
COMPOUND
MITER SAW
WITH LASER GUIDE
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 69683
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69683
Summary of Contents for Chicago Electric 69683
- Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69683 10" COMPOUND...
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-800-444-3353. Item 69683... -
Page 3: Safety
10. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. Item 69683 For technical questions, please call 1-800-444-3353. Page 3... - Page 4 The blade result in a risk of injury to persons. retaining nut/bolt should be checked periodically and tightened if necessary, especially after braking. 21. When servicing use only identical replacement parts. Page 4 For technical questions, please call 1-800-444-3353. Item 69683...
- Page 5 If you feel any medical or vibration occurs, stop use immediately. physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 69683 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Specifications
This product complies with 21 CFR 1040.10 and 1040.11 Diode Mfr.: Zhenjiang Bouncer Stone Electron Co, Ltd, 2F, Guyang Xincun Uptown 16 Din Mao Rd., Zhenjiang, China Manufacture Date: ___________, ______ Page 6 For technical questions, please call 1-800-444-3353. Item 69683... -
Page 7: Setup
Mounting Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included. Item 69683 For technical questions, please call 1-800-444-3353. Page 7... - Page 8 Functions Trigger Trigger Lock Lock Trigger Dust Collection Lower Guard Blade Clamp Fence Turntable Miter Lock Table Miter Extension Miter Scale Kerf Board Knob Page 8 For technical questions, please call 1-800-444-3353. Item 69683...
- Page 9 Lower Guard. Note: Additional functions are explained elsewhere in the manual. Align pin with Align pin with deep groove shallow groove to lock cutting head. to unlock cutting head. Item 69683 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Operation
9. Rotate the Guard Pivot Plate (61) back into place, and secure it with the Guard Pivot Bolt (63). 10. WARNING! Make sure the Lower Guard (56) operates smoothly and properly protects from the Blade before using the saw. Page 10 For technical questions, please call 1-800-444-3353. Item 69683... - Page 11 4. Make a sample cut in a piece of scrap to confirm that the bevel angle is correct. If it is not, correct the angle before cutting. Bevel Lock Lever Bevel Figure C Indicator Item 69683 For technical questions, please call 1-800-444-3353. Page 11...
- Page 12 Clamping the workpiece will also improve cutting accuracy by preventing the workpiece from moving during the cutting operation. Page 12 For technical questions, please call 1-800-444-3353. Item 69683...
- Page 13 9. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. Item 69683 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Maintenance
Repeat the process until the Fence is adjusted accurately. 5. Once the Fence is accurately adjusted, tighten the bolts firmly in place. Recheck one last time, then proceed to work. Page 14 For technical questions, please call 1-800-444-3353. Item 69683... - Page 15 Bevel Angle at 45º left. 4. Ensure that the left side of the Blade clears the Kerf Board. 5. Tighten the four screws holding the Kerf Board in place. Item 69683 For technical questions, please call 1-800-444-3353. Page 15...
-
Page 16: Troubleshooting
Depth Stop set too shallow. Adjust Depth Stop Bolt for desired depth of cut. cut completely through workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-800-444-3353. Item 69683... - Page 17 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69683 For technical questions, please call 1-800-444-3353. Page 17...
-
Page 18: Parts List And Diagram
Stator 130 Wire Clamp Upper Guard ST4.8×65 Screw 131 M4×6 Bolt Guard Label 6000 Bearing 132 Transformer Lower Guard Roller Rotor 133 ST3.2×6 Screw Ø5 Retaining Ring Seal 134 Connector Page 18 For technical questions, please call 1-800-444-3353. Item 69683... - Page 19 Assembly Diagram Item 69683 For technical questions, please call 1-800-444-3353. Page 19...
-
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.