6 amp reciprocating saw with rotating handle (16 pages)
Summary of Contents for Chicago Electric 67411
Page 1
8-1/4” Compound miter Saw model 67411 Set up and operating inStruCtionS ® distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
SupportS ..... 11 adjuSting tHe miter angle .. 11 adjuSting tHe beVel angle ... 12 Fine adjuStment ControlS ... 12 uSing tHe deptH Stop ....12 making a Cut ........ 12 SKU 67411 For technical questions, please call 1-800-444-3353. Page 2...
MAKE WORKSHOP KID PROOF with the safety with padlocks, master switches, or by alert symbol, indicates a removing starter keys. hazardous situation which, if not avoided, could result in minor or moderate injury. SKU 67411 For technical questions, please call 1-800-444-3353. Page 3...
Page 4
ALWAYS USE SAFETY GLASSES. mounting, and any other conditions Also use face or dust mask if cutting that may affect its operation. A guard operation is dusty. Everyday eye- SKU 67411 For technical questions, please call 1-800-444-3353. Page 4...
(GFCI) should also be imple- to lock the head in place for carrying mented – it prevents sustained elec- and storage. It is not to be used for trical shock. any cutting operation. SKU 67411 For technical questions, please call 1-800-444-3353. Page 5...
Check with a qualified electrician or SaVe tHeSe service personnel if the grounding inStruCtionS. instructions are not completely under- SKU 67411 For technical questions, please call 1-800-444-3353. Page 6...
This tool vibrates during use. Re- peated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: SKU 67411 For technical questions, please call 1-800-444-3353. Page 7...
Fence (83) Table (74) Miter Attach Clamp here Angle Scale Miter Knob (93) Kerf Board (80) Base (95) Add Extension Supports here and on other side of Base Figure 1 SKU 67411 For technical questions, please call 1-800-444-3353. Page 8...
Insert the Project Clamp into the slot indicated in Figure 1 and lock in place with the wing nut. Secure the work piece to the saw table using the Clamp. Securing the work piece SKU 67411 For technical questions, please call 1-800-444-3353. Page 9...
When the Handle is lowered, the Blade Guard raises automatically. When the Handle is raised the Blade Guard returns to its safety position. Keep hands clear of the Blade SKU 67411 For technical questions, please call 1-800-444-3353. Page 10...
Knob (93) by turning it approximately making a cut. The material must be 1/4 turn counterclockwise. Press level on the Table. The material must down the Miter Lock Lever to unlock SKU 67411 For technical questions, please call 1-800-444-3353. Page 11...
Do not make any cuts until you have read this entire booklet and are familiar with the operation of this tool. Release the Locking Pin to allow the blade assembly to come up. Check to SKU 67411 For technical questions, please call 1-800-444-3353. Page 12...
Page 13
Blade to stop turning, release the Clamp and remove the work material from the saw. When finished working, unplug the electrical cord, clean the tool surfaces SKU 67411 For technical questions, please call 1-800-444-3353. Page 13...
Clean, then store the tool indoors out of children’s reach. If the blade has become dirty, use a blade cleaner (not included) to clean it. Dirty blades will bind more easily, SKU 67411 For technical questions, please call 1-800-444-3353. Page 14...
Page 15
Pull out the Locking Pin and lower the Unthread and remove the Arbor Bolt saw head until it locks in place in the (17), the Outer Flange (18), and the lowered position. Blade (19). SKU 67411 For technical questions, please call 1-800-444-3353. Page 15...
Using The Depth Repeat the process until the Fence is Stop on page 12. See Figure 2 for the adjusted accurately. location of the Angle Stop Bolt and Lock Nut. SKU 67411 For technical questions, please call 1-800-444-3353. Page 16...
Replace the Fence. Cleaning and lubricating the miter Saw Observe the Dust Bag while using the saw. Empty the sawdust into an appropriate container when the bag is full. SKU 67411 For technical questions, please call 1-800-444-3353. Page 17...
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 67411 For technical questions, please call 1-800-444-3353. Page 18...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 67411 For technical questions, please call 1-800-444-3353. Page 21...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 67411 For technical questions, please call 1-800-444-3353. Page 22...