Table of Contents
Advertisement
open the kerf to release the saw, and
set it aside. Resolve the problem that
caused the kick back before resum-
ing work.
17.
When restarting a cut, put the
base plate (103) flat on the work
material, with the Saw Blade (43)
in the kerf. Pull the Blade back from
the end of the cut, leaving a space
ahead of the blade. Be sure the blade
is not binding, and can turn freely in
the kerf. Firmly grip the tool with both
hands and squeeze the Trigger (79)
to restart the tool. Continue with the
cut.
Vibration Safety
This tool vibrates during use. Re-
peated or long-term exposure to
vibration may cause temporary or
permanent physical injury, particularly
to the hands, arms and shoulders. To
reduce the risk of vibration-related
injury:
1.
Anyone using vibrating tools regu-
larly or for an extended period should
first be examined by a doctor and
then have regular medical check-
ups to ensure medical problems are
not being caused or worsened from
use. Pregnant women or people
who have impaired blood circulation
to the hand, past hand injuries, ner-
vous system disorders, diabetes, or
Raynaud's Disease should not use
this tool. If you feel any medical or
physical symptoms related to vibra-
tion (such as tingling, numbness, and
white or blue fingers), seek medical
advice as soon as possible.
2.
Do not smoke during use. Nico-
tine reduces the blood supply to the
SKU 66660
For technical questions, please call 1-800-444-3353.
hands and fingers, increasing the risk
of vibration-related injury.
3.
Wear suitable gloves to reduce the
vibration effects on the user.
4.
Use tools with the lowest vibration
when there is a choice between dif-
ferent processes.
5.
Include vibration-free periods each
day of work.
6.
Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7.
To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SaVe tHeSe
InStrUCtIonS.
Page 9
Advertisement
Table of Contents
