JB Systems PIXEL PIPE Operation Manual page 9

Table of Contents

Advertisement

ENGLISH
[FS00-FS15] Strobe
Use this function for strobe effect.
Use the ▲ or ▼ buttons for adjusting the speed between slow (FS00) and fast (FS15).
[SU00-SU32] Sound mode
Use this function to activate the sound mode..
Use the ▲ or ▼ buttons for adjusting the sensitivity between not (SU00) and very sensitive (SU31).
[AUtO] Automatic mode
Use this function to put the fixture in an automatic running mode.
[SP01-SP99] Speed
Use this function to set the speed.
Use the ▲ or ▼ buttons to select the desired speed from slow (SP01) to fast (SP99).
[don-doFF]
This function leaves the display on or off during use.
Use the ▲ or ▼ buttons to select the desired mode:
[don] : display on.
[doff] : display off.
[Iron-IroF]
This function is used to enable or disable the IR remote control.
Use the ▲ or ▼ buttons to select the desired mode:
[don] : IR remote control enabled.
[doff] : IR remote control disabled.
[Stnd-rev]
This function is used to inverse the display.
Use the ▲ or ▼ buttons to select the desired mode:
[Stnd] : normal display.
[rev] : inversed display.
[dEFA]
This function is used to reset the fixture to its default factory settings.
Select [dEFA], the display is blinking.
Press the ▲ or ▼ buttons at the same time to reset the fixture to the default factory settings.
OPERATING INSTRUCTIONS
A. Standalone 1unit:
• Just connect the projector to the mains.
• Select one of the automatic, sound or static color modes
• Refer to chapter HOW TO SETUP to learn how to make the settings.
B. Two or more units in master/slave setup:
• Connect the units together. Refer to the chapter "electrical installation" to learn how to do this.
• Select one of the automatic, sound or static color modes on the master (the first projector in the DMX
chain)
• Set all the other projectors in SLAVE mode
• The projectors will now follow the program of the master projector so they all work synchronously.
NOTE: you can use the wireless remote controller to select the functions on the master unit. The slaves
will follow.
JB SYSTEMS
®
7/11
USER MANUAL
PIXEL PIPE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PIXEL PIPE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents