Connection In Progress Alert; Power On Card Alert; Reset Call Log Information; Security Lock Enabled Alert - Sierra Wireless AirCard 580 User Manual

Connection in progress alert

A "
Connection in Progress
the AirCard 580 from the system tray shortcut menu prior to terminating your connection.
Power Off
When a connection is in progress, you cannot exit or power off the AirCard 580 without first
terminating the connection. Select
menu.
Click to dismiss the alert message and keep Watcher power on and the connection active.
No

Power on card alert

If the AirCard 580 has been "powered off," an attempt to connect by clicking the
buttons causes this alert to appear. Click
Note: You must turn the AirCard 580 power on before making a connection. Access the shortcut menu by clicking
the system tray icon and selecting "Power On Card".
Reset call log confirmation
When you reset the Call Log, a confirmation message appears. Select
current entries and to reset the

Security lock enabled alert

A connection cannot be made while the security lock feature is enabled. If a connection attempt is
made while the security lock is on, an alert appears explaining that the card is locked. You may disable
the feature from the
Settings

Security enter lock code

For security purposes, you have the option to lock the AirCard 580 when not in use. Each time you use
the AirCard 580, you will be asked for a four-digit passcode. The default lock code is the last four digits
of your Directory number. Access the About tab from the Settings menu or contact Verizon Wireless
Customer Service if you cannot remember your Directory number. You may change your lock
code by accessing the
Settings

Security incorrect lock code

An alert appears if the security lock code entered is incorrect. Click
enter the correct lock code.

Software mismatch alert

This alert appears if the Watcher software version you are installing is older than the modem software.
Click to dismiss the dialog.
OK
Note: You may continue to use the AirCard 580 after closing the alert window, even with the software mismatch.
Please contact your service provider to check when the latest software upgrades are available.
" or "
Connection is still Active
from Full Mode view or the system tray icon shortcut
Disconnect
to close the alert window and power on the AirCard 580.
Yes
Last Reset Time
menu.
menu.
" alert occurs if you attempt to your select
Yes
to the current time.
OK
or
Connect Settings
to confirm the deletion of the
to dismiss the dialog and re
or
Exit
29