Table of Contents
Advertisement
Disconnect" in this chapter on page 18).
Click the Watcher system tray icon found in the system tray and a menu appears:
1.
Select
from the menu. (This closes and exits Watcher and the icon disappears from the
Exit
2.
system tray).
Powering the AirCard 580 (On/Off)
To power the AirCard 580 on and off:
Click the Watcher icon found in your system tray.
1.
Select
"Power Off Card"
2.
Note: Powering Off the AirCard 580 does not mean that you have exited Watcher.
WARNING: Do not eject theAirCard 580 from your notebook PC until you have followed the Unplug/Eject Hardware
instructions for proper removal [See Chapter 3, page 11]. Removing the card improperly may damage your
computer.
Note: If you have not activated your AirCard 580, an Activation Alert Notification displays once an attempt to
connect is made. The dialog explains that you must activate your card in order to establish a connection.
Connect and disconnect
Connect
Once you have properly inserted the AirCard 580 wireless modem into your notebook PC's Type II PC
Card slot. Watcher notifies that it is "Ready" to connect to the network.
Note: A "No Service" message appears when the AirCard 580 cannot locate the network.
Click the
Connect
1.
Figure 4-1: System tray shortcut menu
or
"Power On Card"
button to establish a connection.
from the shortcut menu.
18
Advertisement
Table of Contents
