Watcher automatically detects or creates a default
profile.
Watcher prompts you to create a data profile.
•
If Watcher opens the Options window Profile
pane and pre-selects an appropriate profile
(normally the name of your service provider)
from the drop-down list...
•
If Watcher opens the Options window Profile
pane, the Profile name field is blank, and
your service provider is not included in the
drop-down list...
a. The first time you insert the modem in the computer, it takes a few seconds for the modem to locate the net-
work. While it is scanning for a network, the Connect button is unavailable.
Rev 1.0 Nov. 09
Or, in Watcher:
Select
1.
2.
Follow the on‐screen instructions.
Note: Do not remove the modem until the software installation
process is complete.
Mac
To uninstall Watcher:
1.
Select
2.
Follow the on‐screen instructions.
Connect to the network
Windows
To use your account (and connect to your service provider's
network), you need to have at least one profile set up on your
modem. Depending on how your modem is configured, the
profile may already be set up or you may need to create one.
Scenario
Once the software is successfully installed and the profile is set
up, the modem is ready to use.
Anytime you use the modem with the same computer, TRU‐
Install verifies that the correct software is already installed.
This process may take a few seconds.
If you need to re‐install the software, see page
Tools > Software Installation Mode
3G Watcher > Uninstall 3G Watcher
Required action
Click Connect
a
.
Click Yes, then....
1.
Click OK to accept that profile (or choose
a.
another from the drop-down list).
Click Connect
b.
You need to create a profile manually. Refer to the
Watcher online help for details.
Click Help > Help topics or click the
.
.
a
.
button.
14.
15