WLAN antennas
To remove the WLAN antennas, use these procedures and illustrations.
Table 5-10
WLAN antennas description and part number
Description
WLAN antennas
Before removing the WLAN antennas, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the system board
Remove the WLAN antennas:
1.
Remove the cables from the routing paths and clips (1) under the system board.
2.
Peel the antennas (2) off the computer.
To install the WLAN antennas, reverse this procedure.
Lock bracket
To remove the lock bracket, use these procedures and illustrations.
Before removing the lock bracket, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
(System board on page
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
28).
39).
28).
Spare part number
N85228-001
28).
28).
WLAN antennas
43